Non-pigmented sealers for concrete floors. Low viscosity, water-based or solvent-based acrylic, epoxy and polyurethane resins to permanently impregnate and seal dusty floors.
Sethard L
Sethard L is a clear surface hardener and dust proofer designed for application to concrete and other cementitious floors.
Setseal 6
Setseal 6 is a clear, acrylic resin based, single pack solution designed to impregnate concrete surfaces combining the benefits of a curing aid, sealer, dustproofer and hardener.
Resin coatings
Coloured epoxy, polyurethane and urea resin coatings to provide attractive finishes in new or old factories, warehouses, stockrooms, garages or car parks.
Dairyguard WB
Dairyguard WB is a hard wearing, two part, water dispersed, coloured epoxy coating. Dairyguard WB can be used for treating new or old concrete floors and walls.
Self-levelling screeds
High strength cement-based screeds, hand-applied or pumped, provide smooth floors suitable for fork lift traffic, internally or externally.
SCHÖNOX FPL PLUS
SCHÖNOX FPL PLUS is a self-levelling screed in layer-thickness of 3 – 50 mm. With aggregate 60 mm. SCHÖNOX FPL PLUS is noted for very little shrinkage.
Resin screeds
Epoxy or Polyurethane resin screeds provide exceptionally hard-wearing finishes to food plants, kitchens or chemical storage areas.
Nitomortar S
High strength, abrasion-resistant epoxy reinstatement mortar. For the fast and permanent reinstatement of concrete, particularly where high strength, abrasion-resistance and resistance to chemicals is required.
Non-slip finishes
Fast-setting polyurethane or urea resins incorporate graded aggregates for areas requiring good slip resistance for foot or vehicular traffic.
Eurogrip 3000
Anti-skid surface coatings for roads, bridges, pedestrian crossings, car parks, ship’s decks and areas where slip and skid resistance is important.
Bonded polymer screeds
Polymer admixtures allow cement based screeds from 12mm to be applied to concrete subfloors.
Bondcrete Polymer
Bondcrete Polymer is based on styrene butadiene. It is used as an admixture for cementitious applications, including repairs, renovation, surfacing of floors and walls and for general bonding.
Rapid drying screeds
Cement-based screeds dry within days allowing the application of wooden, vinyl or tiled coverings to proceed quickly.
Super FG
Super FG is a pre-mixed magnesium phosphate cement blended with specially selected aggregates. The resulting mix produces a mortar which gives rapid setting and high early strength properties suitable for works carried out in raising or lowering carriageway frames and covers.
Dry shake toppings
Coloured or natural, quartz or metallic dry shakes increase the abrasion resistance of the surface by over 500%.
Parlourtop
Parlourtop is a non metallic coloured dry shake topping, containing special aggregates and hardeners, for new milking parlour floors. ption of the use case for this product.
Specialists in concrete treatments and chemicals for Construction, Engineering and Architecture
